Fabulous Tips About How To Build A Wood Retaining Wall
![How To Build A Retaining Wall (Diy) | Family Handyman](https://diy.sndimg.com/content/dam/images/diy/fullset/2011/7/11/0/Ultimate-How-to_Retaining-wall-ReBar-in-base-beam_s4x3.jpg.rend.hgtvcom.1280.960.suffix/1420707988157.jpeg)
Galvanized nails, keeping the top ends flush.
How to build a wood retaining wall. Screw a 2x8 top cap to the top. They should be 18 inches deep. Once the soil is loosened, start digging down into the ground.
3 dig 18 inch (46 cm) deep holes for your posts. Use a steel bar to loosen rocks. Nail vertically oriented plywood to the top and bottom plates and to the front of the wall.
Once the posts are cut, then lay them aside, and dig the holes you need on each side of the retaining wall area. Step 1 remove soil and dig a trench lay out the wall, excavate the soil behind it, and dig a trench 8 inches deep for the first course of timbers. You will have to plan the wood retaining wall and then prepare the area to be installed, digging into the slope.
(see below for a shopping list an. Place the first row of timbers directly on the crushed rock base. You want to have at least two inches of concrete on all sides and when you have you when you run your post line the strings to set your posts in a parallel line.
Nail the header onto the bottom of the. Leave no gap between the timbers. Set the posts inside each hole.
Start at a corner or structure that you are abutting against. Thrust your shovel into the soil and jiggle it forward and backward and side to side. Once the planning is done, you need to anchor the posts, pour.
Use a hand tamper to compact the bottom of the trench. Line the trench and excavation with landscape.